Unable to load photo




Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Will

Pages: [1] 2
1
Other Items / Re: Michelin xzl 335/80/R20 or 12.5R20 tyres
« on: December 23, 2016, 07:15:47 pm »
Yes, still got these.

Will. 07725139888

2
North England / Re: Working demo
« on: February 05, 2016, 11:18:59 am »
That's what defenders are for! how many would you like me to bring casto?


Will.

3
North England / Re: Working demo
« on: February 02, 2016, 08:39:22 pm »
Need an oval to hoon round and round! :p

4
Genuine Mercedes Unimog Parts / Re: Also looking for tyres
« on: January 17, 2016, 10:27:56 am »
I have some 12.5r20 Michelin xzls bit of wear to one edge or a bit of rock rash but perfectly serviceable.

£400 for 4 with abit of rock rash

£300 for 4 with some wear to one edge

~12-20mm tread on them all.

Will 07725239888

5
Other Items / Re: Michelin xzl 335/80/R20 or 12.5R20 tyres
« on: December 27, 2015, 10:43:31 pm »
No worries, I've tried six times to upload pics but I'm struggling! Drop me a text and I will happily send you some across.

Will.

6
Other Items / Michelin xzl 335/80/R20 or 12.5R20 tyres
« on: December 26, 2015, 09:52:33 pm »
I have 8 of these for sale, four have some rock rash, four have wear to one edge, most are approximately 50-75% across the tread.

I have them on eBay at £150 per tyre but I am very much open to offers, be them silly ones reasonable ones or swaps for mog/ landrover/ tractor parts!

Will, 07725139888

7
General Banter! / Re: Second unimog on its way
« on: June 21, 2015, 04:54:20 pm »
Could you post some pics of the hitch setup you have Phil?


Cheers.

8
General Banter! / Re: anyone running an MB trac and mog on here?
« on: April 13, 2015, 09:23:57 pm »
Better visibility, perhaps wider choice of tyres in 24"?

My mate has two 800 tracs and I would pick one of them to use on linkage duties I think but having never used a mog with linkage perhaps I am missing something?

Will.

9
Introduce Yourself / Re: 406 DOKA Cabrio
« on: April 01, 2015, 07:40:43 pm »
Bkts are pretty good tyres, quite a few lads I know run them on their tractors.

10
General Banter! / Re: 411 roll cage
« on: December 02, 2014, 07:17:18 pm »
Shaunymog you must have different scaffolding over there? UK scaffolding tube is certainly not safe to use as a roll cage. Yes it would save you if you gently rolled onto your side but it is not suitable for a rollcage.

I would look at using 'blueband' steam pipe it's approved for landrover cages, can be push bent and is cheaper than cds/ cost effective.

If your tying your cage to the cab make sure you add some floor level tie bars and endure seats and seat belts are bolted to the cage also.

Will.


11
General Banter! / Re: Front cab mount refurb?
« on: November 24, 2014, 08:02:30 pm »
The front cab mount looks like lots of landrover bushes, I will probably use something like an NTC1772 when it comes to replace mine.

Will.

12
Unimog build threads / Re: 416 Project
« on: November 09, 2014, 10:35:56 pm »
Looking again I realise that 80/90 is too thick for the gearbox but the farm oil I put in the engine is SAE30 and GL4 so that will do.

These are the new internals I made for the sidelights.


And at home keeping the curtains twitching.


Will.



13
Unimog build threads / Re: 416 Project
« on: November 09, 2014, 01:06:10 pm »
Well I made it home. Done probably 35 miles in it. The front axle has blown the seals from the portal unit to the swivel so I have filled it with power Harrow grease for now. Are these a big job to do? I presume you split it at the kingpins?

Maxed out seems to be 52 mph gps speed ~80k on the tacho. I'll get some pictures later.

Will.

14
Unimog build threads / Re: 417 Snow Plough
« on: November 07, 2014, 08:07:17 am »
She must have some lift, they don't look that big!

15
Unimog build threads / Re: 417 Snow Plough
« on: November 06, 2014, 10:03:46 pm »
Are they Mudzillas or remoulds on the Landy?

Pages: [1] 2